Operating The Appliance; Cleaning Routes - Amibot Spirit ICE Manuel D'utilisation

EN

Operating the appliance

Press the CLOCK button on the remote control (Figure 1). The time
flashes; use the arrows to adjust the hour and minutes (Figure 2).
Press CLOCK again to validate the time (Figure 3). A quick beep
indicates that the time is set.
Setting a schedule
Figure 1
Figure 3
Press the PLAN button on the remote control (Figure 1). The schedule
time flashes; use the directional arrows to adjust the hour and minutes
(Figure 2). Press PLAN to validate the scheduled clean time (Figure 3).
Figure 2
Figure 4
16
Operating the appliance
To cancel a schedule, reset the scheduled PLAN time to 0 (Figure 4).
To do so, follow the same steps as above.
NOTE: Scheduled cleaning and the remote control times are cancelled when the
batteries are changed. Reset the time and scheduled cleaning time as above.

Cleaning routes

The robot has five cleaning routes. These routes can be selected
using the remote control. AUTO and Random modes can also be
selected on the top of the robot.
AUTO Mode
Click on the CLEAN button on the remote control or the AUTO button
on the appliance. This cleaning mode is recommended for clear
spaces. The robot makes forward movements.
EN
17