Emerson CURVA SKY CF145LBS00 Manuel Du Propriétaire page 15

7. Optional Installation of No-Light Cover
7.3
Disconnect the LED Light Fixture Assembly wire terminals
from the Fan Motor Assembly wire terminals. (Figure 22).
Store the LED Light Fixture Assembly in a safe location for
future installation.
Tuck the Fan Motor Assembly wires and connectors into
the Lower Housing prior to assembling the No-Light Cover.
7.4
Place the No-Light Cover onto the Lower Housing aligning
the three flat areas on the top flange of the
No-Light Cover with the three Dimples on the inside of the
Lower Housing (Figure 23).
Then turn the No-Light Cover clockwise until it stops
turning.
Your No-Light Cover is now installed.
FAN MOTOR
ASSEMBLY WIRE
TERMINALS
LED LIGHT
FIXTURE ASSEMBLY
WIRE TERMINALS
LED LIGHT FIXTURE
ASSEMBLY
Figure 22
Please contact 1-800-654-3545 for further assistance
15
(Continued)
emersonfans.com
U.L. Model No.: CF145L & CF153L