Setting Mono/Stereo; Presetting Stations - Samsung HT-D423H Manuel D'utilisation

DSP (Digital Signal Processor)/EQ
DSP (Digital Signal Processor) : DSP modes have
~
been designed to simulate different acoustic
environments.
EQ : You can select POPS, JAZZ , ROCK, or USER
~
to optimize the sound for the genre of music you are
playing.
Press the DSP/EQ button.
POPS, Select POP, JAZZ, or ROCK,
JAZZ, depending on the genre of music
ROCK you're listening to.
You can enjoy music as you set in
"EQ:USER ".
If you press ENTER in the "EQ:USER"
USER
menu, you will see a window where you
can change the EQ settings to your
preference.
Provides a sense of presence as if in a
STUDIO
studio.
Simulates the sound of a dance club
CLUB
with a throbbing bass beat.
Provides a clear vocal as if listening in a
HALL
concert hall.
MOVIE Provides the feeling of a movie cinema.
Provides the feeling of being in a
CHURCH
grand church.
OFF Select this for normal listening.
✎
NOTE
`
The DSP/EQ function is only available in Stereo
mode.
`
The DSP/EQ function is not available while
playing AC3 signal in 2.1 channel mode.
HT-D423H-XU-ENG-0315.indd 31
FUNCTION
POWER
TV SOURCE
DVD RECEIVER/TV SLEEP
1 2 3
4 5 6
7 8 9
DSP /EQ
0
MUTE
TUNING
VOL
/CH
REPEAT
DISC MENU MENU
TITLE MENU
TOOLS
INFO
RETURN EXIT
TUNER MEMORY MO/ST CD RIPPING
A B C D
DIMMER S . VOL AUDIO UPSCALE
P .BASS
Listening to Radio
Using buttons on the Remote Control
1. Press the FUNCTION button to select FM.
2. Tune in to the desired station.
Preset Tuning 1 : You must first add a desired
~
frequency as a preset. Press the STOP (@) button
to select PRESET and then press the TUNING/
) button to select the preset station.
CH(
~ Manual Tuning : Press the STOP (@) button to
select MANUAL and then press the TUNING/CH
( ) button to tune in to a lower or higher
frequency.
Automatic Tuning : Press the STOP (@) button
~
to select MANUAL and then press and hold the
TUNING/CH( ) button to automatically search
the band.

Setting Mono/Stereo

Press the MO/ST button.
~ Each time the button is pressed, the
sound switches between STEREO and
MONO.
In a poor reception area, select MONO for a clear,
~
interference-free broadcast.

Presetting Stations

Example : Presetting FM 89.10 in the memory
1. Press the FUNCTION button to select FM.
2.
Press the TUNING/CH (
<89.10>.
3. Press the TUNER MEMORY button.
Number flashes on the display.
~
4. Press the TUNING/CH (
to select preset number.
You can select between 1 and 15 presets.
~
5. Press the TUNER MEMORY button again.
~ Press the TUNER MEMORY button before
number disappears from the display.
~ Number disappears from the display and the
station is stored in memory.
6. To preset another station, repeat steps 2 to 5.
) button to select
) buttons
1
English
2011-03-18 3:46:31