Setup - Redox Probe Calibration; Setup - Password - aqua HC151 PH-RX Mode D'emploi

HC151 PHRX
Digital multifunction solenoid metering pump
4.1.7.2 SETUP – REDOX PROBECALIBRATION
ENTER
4.1.8 SETUP – PASSWORD
The PASSWORD menu allows you to change the password to access ADMIN menu (see 4). The
menu consists:
PRESS
& HOLD
ENTER
ADSP9500092
CALIBR. PROBE
PH/
RX/
ENTER
SOL. RX 475
MIS. RX 475
ENTER
RX QUALITY
<N> %
ENTER
REST. PAR. RX
NO/YES
Press and hold the ESC key to return to the previous menu
PASSWORD
ENTER
PWD
0000
14/04/2015 Rev. 1.0
RX
Plunges the probe in a known solution (eg.
475mV). In the event that the measured value
does not correspond to the value of the buffer
solution, with the Up and Down buttons you can
change the value of the solution
In automatic mode the pump will calculate the
quality of the probe.
Use Up & down to decide whether to restore the
values of the previous calibration or whether to
store the calibration values just made.
Use the Up and Down keys to set the
password. The character that you are
changing blinks and to pass to the
next character you must press Enter.
When you have set the password,
press & Hold the Enter key to return
to the previous menu.
ENGLISH
43/123