User Interface; Internal Terminal Block - aqua HC151 PH-RX Mode D'emploi

HC151 PHRX
Digital multifunction solenoid metering pump

Restore Default values
You can restore the factory settings of pump.
2.4

USER INTERFACE

The user interface of the pump HC 151 Digital is presented in this way:
2.5

INTERNAL TERMINAL BLOCK


CAUTION: Always disconnect power when servicing the unit.
INPUT
FLUSH
LEV
INHIBIT
STBY/BATCH
ADSP9500092
DESCRIPTION
Input to connect a flow sensor.
Input to connect a level probe.
Input to connect a signal to inhibit dosing.
Input to connect a signal to allow the pump in
Standby or to enable dosing (BATCH)
14/04/2015 Rev. 1.0
User interfaceconists:

Back light alphanumeric 2x16 LCD

Red L.E.D. for alarm

Green L.E.D. for pump stroke's

4 keys: Up, Down, Enter &ESC
WHAT CONNECT
ENGLISH
30/123