NAD 916 Manuel D'installation page 19

POWER AMPLIFIER SPECIFICATION - NAD 916
Stereo Mode
CONTINUOUS AVERAGE POWER
OUTPUT INTO 8 OHMS
(Min. power per channel, 20Hz-20kHz, both channels driven, with no more than rated distortion)
Rated distortion (THD 20Hz-20kHz)
Clipping power
IHF dynamic headroom at 8 ohms
IHF dynamic power (maximum short term power per channel)
Input impedance
Input sensitivity (for rated power into 8 )
Voltage gain
Frequency response 20 Hz to 20 kHz
2 Hz to 100 kHz
Signal/Noise ratio, A weighted
THD
(Total Harmonic Distortion, 20Hz-20kHz, from 250mW to rated output)
SMPTE I.M.
(IM distortion, 60Hz+7kHz, 4:1 from 250mW to rated output)
IHF I.M.
(CCIF IM distortion, 19+20kHz at rated output)
Bridged (Monophonic) Mode
CONTINUOUS AVERAGE POWER
OUTPUT INTO 8 OHMS
(Min. power 20Hz-20kHz, , with no more than rated distortion)
IHF dynamic headroom at 8 ohms
IHF dynamic power (maximum short term power per channel)
Physical Specification
Dimensions in mm (W x H x D)
Net Weight
Shipping weight
30 W (14.8 dBW)
0.05 %
38 W (maximum continuous power per channel)
+2 dB
8 :48 W (16.8 dBW)
4 :65 W (18 dBW)
2 :85 W (19.3 dBW)
R = 10 k
C = 470 pF
1 V
X15.5 (23.8 dB)
+0.2 dB
+0,-3dB
95 dB ref. 1 W
110 dB ref. rated power
<0.05%
<0.05%
<0.05%
90 W (19.5 dBW)
+2 dB
8 : 140 W (21.5 dBW)
4 : 170 W (22.3 dBW)
435 x 128 x 375
13.1kg
14.8kg
NAD
19