Important Safety Instructions; How This Thermometer Measures Temperature; Control Displays And Symbols; Directions For Use - Microlife FR 100 Mode D'emploi

High Temperature Indication
10 short beeps and a red LCD backlight alert the patient
that he/she may have a temperature equal to or higher than
37.5 °C.

2. Important Safety Instructions

 This device may only be used for the purposes described
in these instructions. The manufacturer cannot be held
liable for damage caused by incorrect application.
 Never immerse this device in water or other liquids.
For cleaning please follow the instructions in the
«Cleaning and Disinfecting» section.
 Do not use this device if you think it is damaged or notice
anything unusual.
 Never open this device.
 This device comprises sensitive components and must be
treated with caution. Observe the storage and operating
conditions described in the «Technical Specifications»
section.
 Protect it from:
- extreme temperatures
- impact and dropping
- contamination and dust
- direct sunlight
- heat and cold
4
 If the device is not going to be used for a prolonged
period the battery should be removed.
 Ensure that children do not use this device unsupervised;
some parts are small enough to be swallowed. Be aware
of the risk of strangulation in case this device is supplied
with cables or tubes.
 The function of this device may be compromised when
used close to strong electromagnetic fields such as
mobile phones or radio installations and we recommend
a distance of at least 1 m. In cases where you suspect
this to be unavoidable, please verify if the device is
working properly before use.
WARNING: Use of this device is not intended as a
substitute for consultation with your physician. This de-
vice is NOT waterproof so do not immerse in liquids.

3. How this Thermometer measures Temperature

This thermometer measures infrared energy radiated from
the forehead. This energy is collected through the lens and
converted to a temperature value.

4. Control Displays and Symbols

 All segments displayed 6: Press the ON/OFF button
4 to turn on the unit; all segments will be shown for
2 seconds.
 Memory 7: The last reading will automatically be
shown on the display for 2 seconds.
 Ready for measurement 8: When the unit is ready for
measurement, the «°C» or «°F» icon will keep flashing.
 Measurement complete 9: The reading will be shown
on the display 3 with the «°C» or «°F» icon; the unit is
ready for the next measurement, when the «°C» or «°F»
icon is flashing again.
 Low battery indicator AT: When the unit is turned on,
the battery icon will keep flashing to remind the user to
replace the battery.

5. Directions for Use

1. Press the ON/OFF button 4. The display 3 is acti-
vated to show all segments for 2 seconds.
2. The last measurement reading will automatically be
shown on the display for 2 seconds with the «M» icon 7.
3. When the «°C» or «°F» icon is flashing, a beep sound is
heard and the thermometer is ready for measuring 8.