Promise Technology FASTTRAK TX4650 Guide De Démarrage Rapide page 3

FastTrak Installation Task List
• Step 1: Unpacking Your FastTrak Card (below)
• Step 2: Installing the FastTrak Card (page 4)
• Step 3: Connecting the FastTrak Card (page 6)
• Step 4: Creating Your Logical Drive (page 8)
• Step 5: Installing Software Drivers (page 11)
• Step 6: Installing WebPAM (page 11)
Thank you for purchasing Promise Technology's FastTrak TX4650 or TX2650
SATA/SAS RAID Controller card.
Step 1: Unpacking Your FastTrak Card
When you receive the FastTrak TX Series SATA/SAS RAID Controller card, the
package should contain the items listed below:
• FastTrak TX4650 or TX2650 card
• Quick Start Guide
• 0.65 m (26 inch) SATA data to SFF-8482 data/power cables
Four for TX4650, two for TX2650
• CD with Promise RAID Management (WebPAM) software, Windows and
Linux drivers, and the FastTrak TX4650, TX2650 User Manual
If any of the items are missing or appear to be damaged, please contact your
dealer or distributor immediately.
The electronic components on the FastTrak TX4650 or TX2650
card are sensitive to damage from Electro-Static Discharge (ESD).
Observe appropriate precautions at all times when handling the
FastTrak card or its subassemblies.
Before installing the adapter into an existing system, backup any
important or useful data. Failure to follow this accepted PC
practice could result in data loss.
Step 1: Unpacking Your FastTrak Card
Warning
Warning
3