Cooper Lighting Solutions Neo-Ray Define S122-125 DS RDS Instructions D'installation page 4

9
With fixtures flush at joining faces, secure fixture to 1/4-20" stud
using 1/4-20" nylon locking nut (by others). Repeat steps 7 through
9 as necessary until all fixture housings in row are installed.
11
Make wire connections between fixtures as required.
4
COOPER LIGHTING SOLUTIONS IL508001EN Installation instructions
10
Once fixtures are flush to one another and level install torx head
screw through cast joiners to snug fixtures together. DO NOT OVER
TIGHTEN. Torx screw will pull fixtures together tightly without too
much force.
12
QUICK
DISCONNECT
Reconnect quick disconnect. Reinstall LED tray assembly.
LED TRAY
ASSEMBLY