Cooper Lighting Solutions Neo-Ray Define S122-125 DS RDS Instructions D'installation page 3

3
Remove access plate from fixture and attach shielded cable to ac-
cess plate.
5
Secure fixture to 1/4-20" studs using 1/4-20" nylon locking nut
(by others)
7
FIXTURE
TONGUE
FOR CONTINUOUS ROWS: For next fixture in row, repeat steps un-
der Fig 2., removing LED tray assembly, diffuser, and diffuser clip.
Lift next fixture in row onto tongue bracket of preceding fixture.
3
COOPER LIGHTING SOLUTIONS IL508001EN Installation instructions
4
Re-attach access plate to fixture pulling power feed through fixture.
Make power and dimming connections to through wiring.
6
QUICK
DISCONNECT
DIFFUSER
FOR INDIVIDUAL FIXTURES ONLY: Reconnect quick disconnect.
Reinstall LED tray assembly, diffuser, and diffuser clips.
8
CAST
JOINER
ALIGNMENT
PINS
Push fixtures together until fixture faces are flush.
WIRE NUTS
(BY OTHERS)
LED TRAY
ASSEMBLY
DIFFUSER
CLIP