Child Protection System - SilverCrest SIKP 3400 A1 Mode D'emploi

Timer in the Temperature Mode
1) First, start the heating in the temperature mode as previously described..
2) Then press the button "F" q repeatedly until the control lamp Temperature
Mode 9 and the control lamp Timer 0 glow simultaneously.
3) Use the buttons "-" 5 and "+" 6 to set the required time, at the lapse of
which the cooking area 1 should switch itself off .
The display 7 now indicates alternately the set temperature level and the time
remaining until switch off .
After the expiration of the time, the cooking area 1 switches off automatically.
NOTICE
If, while the timer is already running, you use the button "F" q to select the
►
power setting (control lamp Power Mode 8 glows) and set a power level,
the timer setting remains active and the appliance switches only from the
temperature mode to the power mode.

Child protection system

To prevent unauthorised switching on or a changing of the settings, by children
for example, this appliance is fi tted with a childproof lock.
Press and hold the button "Lock" z until a signal tone sounds and the control
■
lamp Child Safety u lights up. Now all of the buttons, except the buttons
"Lock" z and "On / Standby" t, are blocked.
■ To release the child safety block, once again press and hold the button
"Lock" z until a signal tone is heard and the control lamp Child Safety u
extinguishes. The buttons are now released.
NOTICE
► Should the child safety block be enabled during operation, the button
"On / Standby" t for switching off and the button "Lock" z can still be
activated.
NOTICE
► Use the child safety feature also as a wiping safety function: before you
wipe over the buttons with a damp cloth, activate the child safety feature.
This helps avoid an inadvertent actuation of buttons.
SIKP 3400 A1
GB
75