Operation - SilverCrest SIKP 3400 A1 Mode D'emploi

Operation

GB
72
The operation of the individual cooking areas 1 2 4 is explained here by
using the rear cooking area 1 as the example. The buttons and control lamps
for the rear cooking area 1 are numbered on the fold-out page. However, the
operation of all 3 cooking areas is identical with the respective operating ele-
ments e i o.
1) Place the cookware with contents in the middle of the rear cooking area 1.
WARNING - PROPERTY DAMAGE!
► In total, the cookware which is placed on the 3 cooking areas may not
weigh more than 10 kg (together with the contents). Otherwise, the appli-
ance could be damaged.
2) Press the button "On / Standby" t. The control lamp On / Standby r blinks.
NOTICE
If you do not activate a cooking area 1 2 4 within 30 seconds, the
►
appliance switches back to standby-mode.
INFORMATION
You may select between cooking with power levelsor cooking with tempera-
ture settings:
► When you are cooking in the temperature mode, the appliance heats the
cookware to the set temperature. If the set temperature should fall, the ap-
pliance heats it up again. The temperature is maintained.
► With setting of the "Power level", the cookware is heated at diff erent speeds.
The higher the selected power level, the faster the cookware is heated.
3) Select the rear cooking area 1 by pressing the button "On / Standby" w.
In the display 7 appears the always preset power level 5 and the cooking
process begins.
You can now use the button "F" q to select which operating mode you want
to use:
The power mode (power level 5) is the default setting.
If you want to change to the temperature mode, press the button "F" q re-
peatedly until the control lamp Temperature Mode 9 glows. "120" appears
in the display 7, indicating that there is a default temperature setting of
120°C.
4) When you have selected the desired operating mode, use the buttons "-" 5
and "+" 6 to select the desired power level or temperature. The temperature
level can be adjusted in 20°C increments.
SIKP 3400 A1