Scope Of Delivery; Transport - Binzel Abicor ABIROB W Mode D'emploi

®
ABIROB W

4 Scope of delivery

• Kink protection on torch neck side with integrated switch cover
• Kink protection on machine side with central
plug
When equipped with the ROBO cable assembly, the welding torch system ABIROB
functioning. For the initial assembly, additional components are required which depend on the welding
task at hand. They include the following:
• Torch neck (in the preferred size and geometry) • Mount (required for fastening to the robot)
• Equipment parts and wear parts (order separately)
Tab. 7 Scope of delivery

4.1 Transport

Checking procedure
on receipt of goods
In case of complaints
Packaging for
returning the goods
Tab. 8 Transport
4.2 Storage
The cable assembly is available in the hybrid and power cable lc versions. We
always offer this cable assembly type as liquid-cooled version only. Order data
and part numbers for the equipment parts and wear parts can be found in the
current ABICOR BINZEL spare parts and wear parts lists. The contact for
consulting and ordering can be found in the Internet at www.binzel-abicor.com.
The components are carefully checked and packaged, however damage may
occur during shipping.
Make sure that the shipment is complete by referring to the delivery note!
Check the package and components for damage (visual inspection)!
If the goods have been damaged during transport, contact the last carrier
immediately! Keep the packaging for possible checks by the carrier.
Use the original packaging and the original packaging material. If you have
questions concerning the packaging and safety during shipment, please
consult your supplier.
Physical storage conditions in a closed room:
 See Tab. 1 Ambient temperature on page EN-5
• Operating instructions
4 Scope of delivery
®
W is not
EN - 9