Temperature Control - Napoleon Entice 36 Serie Mode D'emploi

operating instructions
EN
Turns the heater and blower on/off.
Settings:
H-0 - Heater and blower off
FAN - Blower on
H-1 - Low heat
H-2 - High heat
LOC - Lock-out of heater and thermostat
Heater
NOTE: Press and hold the heater button for 5 seconds to
lock / unlock the heater and thermostat. The blower has a 10
second delay after the heater is off to blow out the residual
heat.
Sets the timer.
Settings:
30M, 1Hr, 2Hr, 3Hr, 4Hr, 5Hr, 6Hr, 7Hr, 8Hr.
Timer
NOTE: The display will read "---" after completing the 9 timer
settings.
Sets desired temperature.
Settings:
18°C (64°F), 19°C (66°F), 20°C (68°F), 21°C (70°F), 22°C
Temperature (72°F), 23°C (74°F), 24°C (76°F), 25°C (78°F), 26°C (80°F),
Control 27°C (82°F), and OFF.
To switch between °C and °F or vice versa, hold the tempera-
ture control button for 5 seconds.
29
W415-2782 / B / 07.20.20