Wall
Insert the appliance into the rough framing, and make sure the framing brackets fit into the slotted holes
D.
of the side trim (Fig. 3-9).
Secure two screws (supplied) through the two slot holes on each side of the appliance with the framing
E.
brackets (Fig. 3-10).
Reinstall the side holding brackets previously removed in step B.
F.
Install media (see "crystal ember installation" section).
G.
Reinstall front glass (see "front glass removal / installation" section).
H.
Wall
Reverse view of appliance
in place (framing hidden
for clarity)
Repeat on
opposite side.
Framing hidden
for clarity.
installation
Framing
Bracket
C x 4
Fig. 3-10
W415-2782 / B / 07.20.20
EN
Slotted
Hole
Slotted
Hole
Fig. 3-9
17