Foam Filter; Cleaning The Filters - shark LIFT-AWAY NV390 Série Manuel D'instructions

STEP 3
3 Press top dust-cup
release latch to access
dust screen and remove
built-up debris as required.

CLEANING THE FILTERS

1 Pre-Motor
(foam and felt):
With the dust cup
removed, take out and
rinse the foam and felt
filters with water. Tap
loose dirt off filters
between washes
as needed.

FOAM FILTER

FELT FILTER
HEPA
2 Post-Motor (HEPA):
To access the HEPA filter,
reach under the grill and,
pull the tab forward and
pull the grill away from
the vacuum. Remove and
rinse the HEPA filter.
s h a r kc l e a n . c o m 18