Fuel Level Sensor – Displays Current Fuel Level
1.
Fuel Tank Cap – Vented Fuel Cap Must be Properly Installed at all times during Operation
2.
Receptacle Panel – See Product Specifications for Individual Model
3.
Double Pole Circuit Breaker (AC) – Protects Receptacles & Generator from Overload
4.
Crankcase Oil Dipstick/Oil Fill Hole Cap – Check/Fill Engine Oil
5.
On/Off Switch – Rocker Style; Set to "ON" to start Engine & "OFF" to Shut Off Engine; Key
6.
Switch Model: Turn to "START" to Crank Engine & "OFF" to Shut Off Engine
Crankcase Oil Drain Plug – Remove to Drain Oil from Crankcase
7.
Recoil Starting Handle – Pull Handle to Rotate Engine for Starting
8.
Fuel Cock (Valve) – Turn to "OFF" to Terminate Fuel Delivery to Engine
9.
Air Cleaner – Check Maintenance Schedule for Service Intervals
10.
Choke –
11.
5000 Watts & 8000 Watts Model: Before starting cold generator, pull the chokepin outward
from generator to activate the choke lever. After allowing generator to run for a few
seconds, push pin inward toward generator.
3500 Watts & 4000 Watts Model: Before starting cold generator, rotate thechoke lever to
the left until resistance is felt. After starting the generator, rotate the choke lever to the right
to disengage.
Earth Grounding Stud – Always connect generator to an Earth Grounding Source. Consult
12.
Local Energy Jurisdiction for Code Requirements in your area.
Muffler & Muffler Hood – Exhaust muffler emits combustion gas from engine and lowers
13.
the noise level of the generator
Valve Cover – Cover for Overhead Valves designed to be removed periodically for valve
14.
adjustments.
Legend
12