Zwilling ENFINIGY 53102-9 Manuel D'utilisation page 3

EN
The device is operated with electric
current. There is therefore a danger of
electric shock:
Only plug the device into a correctly
installed socket.
Only operate the device if the voltage
stated on the type plate matches the
voltage of your socket.
Make sure that the connection
cable is not kinked or pinched and
make sure that the power cord and
the device do not come in contact
with sources of heat (e.g. hobs, gas
flames).
When unplugging the mains plug from
the socket, always unplug the connec-
tion cable directly. Do not carry the
device by the connection cable.
Never touch the mains plug with wet
hands.
Do not insert any objects into the
openings on the device.
As long as the mains plug is plugged
into the socket, live voltage exists
in the device, even if the device is
switched off.
After every use and in the event of
danger or a defect, unplug the mains
plug from the socket immediately. For
this reason, keep the socket into which
the device's mains plug is plugged
easily accessible at all times.
Unplug the mains plug from the socket
prior to cleaning or maintenance of
the device.
Never unscrew the device and do not
make any technical modifications.
www.zwilling.com
Place the cooking vessel on a dry,
level and non-slip surface.
Do not place the cooking vessel on a
hot surface or in the vicinity of strong
sources of heat.
When using the device, the cook-
ing vessel must be filled with water
between the minimum and maximum
level indicators on the device.
Secure the device by clamping it to
the side of your cooking vessel.
Do not immerse the device in water
beyond the upper etch mark on the
stainless steel housing.
Do not use deionised water (DI
water).
Do not lift or move the device or the
cooking vessel during use.
Do not switch on the device until it is
secured to the boiling vessel with the
clamp and immersed in water.
Risk of burns/scalding - The
cooking vessel, the stainless
steel part of the circulator and
the vacuum bags become hot during
use. Use oven mitts or tongs when
handling. Allow the device to cool
down before draining the water bath.
If the device is operating during an
unusual mains power disturbance, this
may result in performance degrada-
tion. It may be necessary to unplug
the mains plug to restore normal
operation.
In the absence of supervision, discon-
nect the mains plug prior to assembly,
disassembly and cleaning.
Safety
2