Controls & Features - Cub Cadet FastAttach 19A30037100 Manuel De L'opérateur

Controls & Features
Blade Lift
Cable Lever
Blade
The blade is used to push snow/dirt/gravel, etc. and can be
angled left or right and raised or lowered.
Blade Lift Cable Lever
The blade lift cable lever is used to raise and lower the blade.
Squeeze the trigger against the handle, press the handle down
and slowly release to lower the blade.
Pivot Release Cable Lever
The pivot release cable lever is used to change the angle of the
blade. Squeeze the trigger against the handle and push the
blade pivot handle forward to angle the blade to the left or pull
back on the blade pivot handle to angle the blade to the right.
Release the handle to secure into position.
Pivot Release
Cable Lever
Blade
Skid Shoe (Not shown)
The skid shoes are located on the bottom of the blade and can
be adjusted up or down depending on the conditions. The skid
shoes set the distance between the ground and the bottom of
the blade.
Shave Plate
The shave plate maintains contact with the surface to be plowed
as the blade is pushed forward.
Shave Plate
(Blade Cutting Edge)
3
11