Beninca BULL 10M Mode D'emploi page 30

BULL
• Do not stand within the gate movement area.
• Children must not play with controls and near the gate.
• In the event of malfunctions, do not attempt to repair the failure but contact the specialised personnel.
In the event of power failure or malfunction, to manually operate the gate proceed as follows:
• After inserting the customized key C, turn it anti-clockwise and pull the lever L.
• The geared motor is unlocked and the gate can be moved by hand.
• To return to the normal operating mode, close the lever L again and manually activate the gate until it is
geared.
• Every month check the good operation of the emergency manual release.
• It is mandatory not to carry out extraordinary maintenance or repairs as accidents may be caused.These
operations must be carried out by qualified personnel only.
• The operator is maintenance free but it is necessary to check periodically if the safety devices and the other
components of the automation system work properly. Wear and tear of some components could cause
dangers.
If the product must be dismantled, it must be disposed according to regulations in force regarding the dif-
ferentiated waste disposal and the recycling of components (metals, plastics, electric cables, etc..). For this
operation it is advisable to call your installer or a specialised company.
All Benincá products are covered by insurance policy for any possible damages to objects and persons caused
by construction faults under condition that the entire system be marked CE and only Benincá parts be used.
30
User's handbook
Safety measures
Manual and emergency manoeuvre
Maintenance
Waste disposal
Warning
C
L