Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Operating Instructions
Mini Surveillance Camera
Item No. 2203065
Intended Use
This surveillance camera is equipped with a motion detector and is capable of low light recording.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bathrooms, must be
avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use the product
for purposes other than those described above, the product may be damaged. In addition, improper use
can result in short circuits, fires, electric shocks or other hazards. Read the instructions carefully and store
them in a safe place. Make this product available to third parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company names and prod-
uct names are trademarks of their respective owners. All rights reserved.
Delivery content
•
Camera
•
Camera stand
•
USB Cable (charging, data)
•
2x double-sided adhesive
•
USB card reader
•
Reset pin
Up-to-date Operating Instructions
Download the latest operating instructions at www.conrad.com/downloads or scan the
QR code shown. Follow the instructions on the website.
Explanation of symbols
The symbol with the exclamation mark in the triangle is used to indicate important information in
these operating instructions. Always read this information carefully.
Safety Instructions
Read the operating instructions carefully and especially observe the safety information.
If you do not follow the safety instructions and information on proper handling in this
manual, we assume no liability for any resulting personal injury or damage to property.
Such cases will invalidate the warranty/guarantee.
a) General information
•
The product is not a toy. Keep it out of the reach
of children and pets.
•
Do not leave packaging material lying around
carelessly. This may become dangerous playing
material for children.
•
Protect the product from extreme temperatures,
direct sunlight, strong jolts, high humidity, mois-
ture, flammable gases, steam and solvents.
•
Do not place the product under any mechanical
stress.
•
If it is no longer possible to operate the product
safely, take it out of operation and protect it from
any accidental use. Safe operation can no longer
be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
b) LiPo battery
•
The rechargeable battery is permanently built
into the product and cannot be replaced.
•
Never damage the rechargeable battery. Damag-
ing the casing of the rechargeable battery might
cause an explosion or a fire! Unlike conventional
batteries/rechargeable batteries (e.g. AA or AAA
type), the casing of the LiPo rechargeable bat-
tery does not consist of a thin sheet but rather a
sensitive plastic film only.
•
Never short-circuit the contacts of the recharge-
able battery. Do not throw the battery or the
product into fire. There is a danger of fire and
c) Connected devices
•
Also observe the safety and operating instruc-
tions of any other devices which are connected
d) Privacy
•
It is the responsibility of the user to be aware of
all applicable laws and regulations that prohibit
or limit the use of cameras, and to comply with
the applicable laws and regulations.
•
Recording and circulating an image of an indi-
vidual may constitute an infringement of their
privacy for which you may be held liable.
•
Ask for authorization before filming individuals,
particularly if you want to keep your recordings
and/or circulate images on the Internet or any
other medium.
•
Operating instructions
- has been stored for extended periods in poor
ambient conditions or
- has been subjected to any serious transport-
related stresses.
•
Please handle the product carefully. Jolts, im-
pacts or a fall even from a low height can dam-
age the product.
•
Consult an expert when in doubt about the op-
eration, safety or connection of the product.
•
Maintenance, modifications and repairs must
only be completed by a technician or an author-
ised repair centre.
•
If you have questions which remain unanswered
by these operating instructions, contact our tech-
nical support service or other technical person-
nel.
explosion!
•
Charge the rechargeable battery regularly, even
if you do are not using the product. Due to the
rechargeable battery technology being used,
you do not need to discharge the rechargeable
battery first.
•
Never charge the rechargeable battery of the
product unattended.
•
When charging, place the product on a surface
that is not heat-sensitive. It is normal that a cer-
tain amount of heat is generated during charg-
ing.
to the product.
•
Do not circulate degrading image(s) or one which
could undermine the reputation or dignity of an
individual.
•
In your country it may be a legal requirement to
display a warning when using surveillance cam-
eras on your property. In such cases it is impor-
tant to display a warning sticker where potential
intruders can see it.
•
You should not point cameras where surveillance
extends to public areas, and video recordings
should not identify people in a public space.
Operating elements
1 Power button
5 Magnetic base
2 Infrared LED
6 Adjustable stand
3 Lens
7 microUSB socket
4 Light sensor
8 Reset button
Getting started
In order to record video and photos the product relies on SD card storage. You will:
•
get the battery ready
•
install and ready the microSD card for storage
•
create the configuration file
a) Basic operation
Turning on and off
•
To turn on, press and hold the power button (1) for approximately 3 seconds.
The indicator lights (11) light up.
•
To turn off, press and hold the power button for approximately 3 seconds.
The indicator lights go out.
Auto-off function
The product turns off automatically if:
•
no input occurs for approx. 60 seconds
•
no microSD card is installed
b) Charging the battery
Charging time: approx. 4.5 hours
Charge the battery before using for the first time.
1. Turn the product off.
2. Connect the microUSB socket (7) to a 5 V USB power adaptor or an available USB port on your com-
puter using a suitable USB charging cable.
3. The left indicator light (11) is green while the battery charges and goes out once it is charged.
- The product may become warm during charging.
c) Extending operation times
The battery has limited run times for day light and night time operation. You may connect the product to a
power bank or other similar power supply through a suitable USB charging cable to extend the operation
times.
d) Install and ready the microSD card for storage
Card requirements: microSD, max. 32 GB, speed class 4 to 10
Installing the microSD card
1. If turned on, turn the product off.
- Attention: Inserting or removing a card during operation may damage the card and device.
2. Insert a microSD card into the microSD card slot (9) with the contacts facing down.
- Attention: Inserting the card incorrectly or using excessive force may damage card or card slot.
3. Carefully push the card all the way in using the tip of your finger. You will feel a click when the card is
in position.
Removing the microSD card
To remove, gently push until you feel a click, then release to eject.
Formatting the microSD Card
1. Connect the microUSB socket (7) to a USB port on your computer through a USB data cable.
2. Turn the product on. Wait for the storage drive to show up on your computer.
3. Format the card using the FAT32 file system.
- Attention: Formatting will erase all data on the microSD card.
- Refer to your computer operating instructions for help, if needed.
4. Eject the storage drive.
e) Creating the configuration file
The product settings are stored on a text file. The settings are loaded when you turn on the product.
Requirements: a FAT32 formatted microSD card is installed.
1. Turn the product off.
2. Connect the microUSB socket (7) to a USB port on your computer through a USB data cable.
3. Turn the product on. Wait for the storage drive to show up on your computer.
4. Open the storage drive. Three items were added automatically:
- < IMAGE > folder, < VIDEO > folder, < time.txt > file
5. Open the < time.txt > file.
6. Make adjustments to the settings according to the table at the end of this section.
- To ensure proper functioning, make sure to type the settings correctly.
9 microSD card slot
10 Mode selection button
11 Indicator lights
12 Ventilation openings
Publicité
Table des Matières
