Spinlock XX Clutch XX0812 Mode D'emploi page 7

ZS–RLB Remote Lockback Switch
For use with ZS Jammers or existing halyard locks. Allows the ZS Jaws to be pre-tensioned for
release.
ZS1214, ZS1014C, ZS1014B, ZS1618, ZS1618C and ZS1618B Jammers are all supplied with jaws
and rear block drilled for trip line attachment and lead. Older style ZS Jammers in this range can
be modified to use the ZS-RLB. Contact the Special Projects Team for assistance in modifying older
products.
Step 1
The start position - ZS-RLB closed,trip line slack and ZS Jammer loaded.
Step 2
Open the ZS-RLB to pre-tension the trip line - the ZS Jammer is now ready to release.
Step 3
Take up load on winch - the ZS-RLB will automatically open the Jaws and allow the line to be
released to the winch.
12
www.spinlock.co.uk
1
loaded
loaded
line
loaded
line
line
2
loaded
loaded
line
loaded
line
line
3
ZS-RLB
load taken
load taken
on winch
load taken
on winch
on winch
installation spares
pages 18-19 pages 36-37
13