American Standard SpaLet Advanced Clean 2.5 Manuel D'installation page 13

4. Installation of the SpaLet
Installation
Figure
Seat
mounting hole
SpaLet ® seat
(2) Install the mounting plate onto the toilet.
1) Insert the bushings into
the seat mounting holes.
Bushings
Seat mounting
holes
(3) Install the SpaLet
1) Place the SpaLet
to the mounting plate.
2) Slightly raise the front side of the SpaLet
it until the mounting plate is fully inserted, and then
press the locking lever to secure the SpaLet
Body
mounting
bolt
Bracket
Mounting
plate
Bushing
2) Insert the mounting
bracket into the mounting
plate and use the
mounting bolts to attach
the mounting plate to the
seat.
Mounting bolts
for the toilet
seat.
®
® seat on the toilet and align the seat
Center aligned
seat
®
(1) Remove the existing seat.
1) Remove the nuts from the seat
mounting bolts, the slip washers,
and rounded packing.
2) Raise the seat and remove it by
lifting the seat mounting bolts.
Seat mounting bolts
Nut
Mounting
brackets
Mounting plate
® seat, slide
®
seat.
13 - EN -
Existing seat
Rounded packing
Slip washer
Loosen
References
• Some toilet seats may require
different methods of removal that
differ from our explanation.