in accordance with:
Regulation No. 2006/42/EC (government notice NV 176/2008 Coll.)
Regulation No. 2004/108/EC (government notice NV 616/2006 Coll.)
Regulation No. 2000/14/EC (government notice NV 9/2002 Coll.)
A. We: The Seco Group a.s., Šaldova 408/30, Prague 8
závod 02 Jičín, Jungmannova 11
Org ID: 60193450
B. Machine description
- type of machine: Self-propelled mower
- model: AG 122
Description:
The AG 122 is a four-wheeled self-propelled lawn mower with a Briggs & Stratton 18-hp, 20-hp or 22-
hp engine. Engine power is transferred through an electromagnetic coupler by V-belts to the mowing
mechanism and drive transmission. The mowing mechanism has two blades propelled by a toothed belt.
Clippings are routed by the tube to the catcher or sent to the ground by the deflector. Instead of being
collected, the clippings can be mulched by using two add-on blades and blocking the removal tube.
C. Regulations by which compliance was judged:
EN 836+A1;2;3, EN ISO 3767;-1,2,3, ISO 11684, EN ISO 11201,
EN ISO 12 100-2, Council Directive No. 97/68/EC (2002/88/EC)
D. Compliance evaluation has been performed according to procedures described in:
- Council Directive No. 2006/42/EC, Article 12, paragraph 2, (equ. § 5, para. 2, NV No. 176/2008 Coll.)
- Council Directive No. 2004/108/EC, Article 7, (equ. § 4, para. 1, NV No. 616/2006 Coll.)
- Council Directive No. 2000/14/EC, Appendix VIII, (equ. appendix 7, NV No. 9/2002 Coll.)
E. We confirm that:
- this machine as defined in the data provided complies with the requirements given in the aforementioned
technical regulations and is safe under conditions of ordinary use.
- measures have been taken to ensure compliance of all products introduced to the market with the
technical documentation and technical regulations.
- guaranteed acoustic output level is 105 dB(A).
Average measured levels of acoustic output based on the engine used:
Engine
Briggs & Stratton 18-hp VANGUARD 3000±100
Briggs & Stratton 20-hp VANGUARD 3000±100
Briggs & Stratton 20-hp Intek
Briggs & Stratton 22-hp Intek
Technical documentation of the scope required by appendix VII to regulation 2006/42/EC and by appendix V of
regulation 2000/14/EC is kept by the manufacturer at the following address:
Seco GROUP a. s.
Plant No. 02 Jičín
Jungmannova 11
506 48 Jičín
In Jičín, October 1, 2009
hereby issue the following declaration:
under supervision of a notified person, LRQA registration No. 0088
Hiramford, Middlemarch Office Village, Siskin Drive
Coventry CV3 4FJ, United Kingdom
RPM (min
) Measured level of acoustic output [dB(A)]
-1
3000±100
3000±100
member of the board
63
102.15
102.65
101.87
103.42
Jiří Pávek