EMAK OM106J Manuel D'utilisation page 62

in accordance with: Regulation No. 2006/42/EC (government notice NV 176/2008 Coll.)
Regulation No. 2004/108/EC (government notice NV 616/2006 Coll.)
Regulation No. 2000/14/EC (government notice NV 9/2002 Coll.)
A. We: The Seco Group a.s., Šaldova 408/30, Prague 8
Plant No. 02 Jičín, Jungmannova 11
Org ID: 60193450
B. Machine description
- name: Self-propelled mower
- model: AJ 102 4x4
Description:
The AJ 102 is a four-wheeled, self-propelled mower with a Briggs & Stratton 23 HP Vanguard or 24 HP Intek
engine. The engine power is transferred over an electromagnetic coupling by V-belts to the mowing and
drive gears. The mowing mechanism has two blades propelled by a two-sided toothed belt. Clippings are
routed by the tube to the catcher or sent to the ground by the deflector. Instead of collecting the clippings,
they can be mulched by using two add-on blades and blocking the removal tube.
C. Rules and regulations according which the Declaration of conformity has been evaluated:
EN 836+A1;2;3, EN ISO 14 982, EN 1050,
EN ISO 12 100-2, Council Directive No. 97/68/EC (2002/88/EC)
D. Evaluation has been done according to procedures described in:
- Council Directive No. 2006/42/EC, Article 5, (equ. § 5, para. 2, NV No. 176/2008 Coll.)
- Council Directive No. 2004/108/EC, Article 7, (equ. § 4, para. 1, NV No. 616/2006 Coll.)
- Council Directive No. 2000/14/EC, Appendix VIII, (equ. appendix 7, NV No. 9/2002 Coll.)
Compliance was judged by accredited testing laboratory No. 1054, SZZLPS a.s. , Třanovského 622/11,
Prague, Czech republic. Final report No. 31 768
E. We confirm that:
- this machine as described above complies with the requirements specified earlier in the technical
parameters and is therefore safe for use under typical operating conditions.
- all measures for securing conformity of all products introduced to the market with the technical
documentation and the requirements of technical regulations have been accepted.
- the guaranteed acoustic output level is 100 dB(A).
Measured of acoustic output levels based on the engine used:
Engine
Briggs & Stratton 23 HP Vanguard
Briggs & Stratton 24 HP INTEK
Technical documentation of the scope required by appendix VII to regulation 2006/42/EC and by appendix V of
regulation 2000/14/EC is kept by the manufacturer at the following address:
Seco GROUP a. s.
Plant No. 02 Jičín
Jungmannova 11
506 48 Jičín
In Jičín on 1. 3. 2010
hereby issue the following declaration:
under supervision of a notified person, LRQA registration No. 0088
Hiramford, Middlemarch Office Village, Siskin Drive
Coventry CV3 4FJ, United Kingdom
RPM (min ) Measured level of acoustic output [dB(A)]
-1
2800±100
2800±100
62
98,86
99,02
Ing. Jiří Pávek
member of board