The Sounddecoder (Only For 78250 And 78251); Br 23 002 Function Key Allocation (Delivery State); Locomotive Settings - Roco DRB 23 002 Manuel

▪ BR 23 002 function key allocation (delivery state)

The factory-set default adress of the lok is 03.
F-Key Function
Light Front lightsr
F1 Travel sound
F2
Whistle short
F3
Whistle, long
F4
Coupling noise
F5
Conductor whistle
F6 Shunting range
F7 Scoop of coal
F8 Air pump
F9
Water pump
F10
Station announcement
F11 Sanding
F12 Whistle
F13 Drain
F14 Mute - key
F15 Pressure release
F16 Injector

▪ Locomotive Settings

The Sounddecoder has been optimally adjusted to this locomotive. You can still adapt numerous deco-
der properties to your wishes however. Certain parameters (referred to as CVs – Configuration Variable
– or register) can be amended.
Please check before each programming if this is really necessary. Incorrect settings can result in the
decoder not reacting correctly.
The decoder is preprogrammed with 128/28 speed steps at the factory for a high level of comfort. This
means that it can be used together with all of the modern DCC ( multi MAUS/ multi MAUS
rola control devices.
2)
The Sounddecoder has been especially modified for the additional functions and must not be
replaced with a decoder which is available from a retailer.
If the locomotive is to be reprogrammed, only the locomotive is to be on the programming
track.
The Sounddecoder
) and Moto-
pro
29
29