Anker PowerCore 20100 Nintendo Switch Edition Manuel De L'utilisateur page 4

EN
LED flashes continuously while PowerCore is recharging. LEDs will deactivate when
PowerCore is fully recharged.
PowerCore cannot charge your Nintendo Switch™ or phone while recharging itself.
Connect the cable with the USB PD port on PowerCore.
【Recharging time】
・About 3 hours via Nintendo Switch™ 's AC adapter.
When your PowerCore is fully charged, the 4 LEDs will remain illuminated for 10 minutes
before turning off automatically.
For optimal recharging speed, use a Power Delivery wall charger. Using a charger without
Power Delivery may result in recharging times over 20 hours.
This product is not compatible with PowerIQ™, PowerIQ™ 2.0, or Qualcomm® Quick
Charge™.
To preserve the battery's lifespan, use and recharge PowerCore at least once every 4
months.
04
Use the original cables provided with your device to charge (or
use a certified third-party cable).
Specifications
Capacity: 20100mAh
PD input: 5V 3A / 9V
PD output: 5V 3A / 9V
Standard output: 5V 2A
Size: About 168 x 62 x 22 mm / 6.6 x 2.4 x 0.9 in
Weight (Main unit) 360 g / 12.7 oz
EN
Battery: Lithium ion battery
3A / 15V 2A / 20V 1.5A
2.6A / 15V 1.6A
05