Safety Instructions
WARNING!
When using power tools, observe
the following basic safety measures
for the prevention of electric shocks
and the risk of injury and fire.
Safety instructions/symbols
on the equipment
Warning!
Risk of injury from the rotating tool!
Keep hands away.
Risk of electric shock!
Disconnect from the mains before
carrying out maintenance and re-
pair work.
Do not expose the unit to rain.
Read and observe the operating
instructions pertaining to the equip-
ment.
Also observe the safety instructions
for your chainsaw and replacement
saw chain
Risk of injury!
Wear ear, eye and hand protec-
tion!
Wear breathing protection.
Risk of cuts!
Wear cut-resistant gloves
Never use faulty grinding disks.
Safety class II
Do not dispose of electrical equip-
ment in household waste.
Dimensions grinding disk
Symbols in the manual
Warning symbols with in-
formation on damage and
injury prevention.
Instruction symbols (the instruction is
explained at the place of the excla-
mation mark) with information on
preventing damage.
Help symbols with information on
improving tool handling.
General safety instructions
•
This appliance is not intended for use
by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience and
knowledge, unless they have been giv-
en supervision or instruction concern-
ing use of the appliance by a person
responsible for their safety.
•
Children should be supervised to en-
sure that they do not play with the ap-
pliance.
Safe operation:
Keep work area clear.
•
Cluttered areas and benches invite in-
juries.
Consider work area environ-
•
ment.
- Do not expose tools to rain. Do not
use tools in damp or wet locations.
Water entering a power tool will in-
crease the risk of electric shock.
- Keep work area well lit.
GB
37