L.S. BILODEAU AirBilo Manuel De Fonctionnement Et D'installation page 47

Step 7 :
Direct network connection wire (C) passing
between two plates to hold it in place, up to the
opening created in step 6. In this opening,
UNDERNEITH, insert the cable end.
SECTION :
Continue installation at step 86
page 43 before continuing with
following steps:
CONFIGURATION OF
TOUCHSCREEN
3
Home page
1- Current temperature (T°) of plenum
2- Current T° in chimney
3- Automatically PILOT
8
4 5
6
4- Pellet feeding functional
5- Smoke extractor operating
6- Burner operating «Low», «Med», «Hi»
7- G10 Fan operating speed «Low» «Hi»
8- Depending on the temperature
required, mode sixty or one hundred
thousand BTU / h to reach or
maintain the temperature
L.S. Bilodeau inc.
Step 8 :
Connect the network cable (B) to the
location marked «ECRAN TACTILE».
Step 10 :
Configure the touch screen.
(Start-up screen)
1
2
Menu Main menu list (8 pages)
Page 1 /8
7
Alarm Alarm management
281 Route 108 Est, Saint-Éphrem-de-Beauce, Quebec G0M 1R0
Tel.: 418 484-2013 ▪ Fax: 418 484-2014 ▪
Home screen
See the following pages
for the meaning of each
of the buttons and menu
choices.
Lets you navigate from one page to another or back to the previous
page. Or click on the page number
for the keypad. Enter the number of the page you want to access.
www.lsbilodeau.com
Step 9 :
Connect the other end of the network
cable (B) under the touch screen.
Step 11 :
Basic configuration saved in French
language * and green wallpaper. To
change select MENU, MENU 2/8 >>>
and continue to: Screen Language
and Color.
* English available with version 1.10
or higher.
wallpaperConfiguration de base
enregistrée en langue française* et
fond d'écran vert. Pour modifier
sélectionner MENU, MENU 2/8 >>>
et continuer jusqu'à : Langue et
Couleur d'écran.
*Anglais disponible avec version
1.10 ou plus.
Page 2 /8
Clicking on the bubble indicating an
alarm will bring you to the alarm
management page indicating the
steps to follow to solve the alarm in
priority.
Etc.
page 46