▼
To remove light dirt
4. Slide the cleaning shutter
until it clicks.
5. Clean the outer foil section
with running water.
6. Turn the shaver off.
• Rinse with water and
shake up and down
several times to remove
the water.
• Be careful not to hit the main body on the sink or any other object
while draining the water. Failure to do so may cause malfunction.
▼
7. Wipe off any drops of water with a dry cloth.
8. Dry the outer foil section and the
shaver completely in a shaded area.
• The outer foil section will dry faster if
removed from the main body.
9. Attach the outer foil section to the
shaver.
12
▼
To remove heavy dirt
4. Turn the shaver off after
10 – 20 seconds.
5. Remove the outer foil
section and turn the shaver
on.
6. Clean the shaver and the
outer foil section with
running water.
• Rinse with water and
shake up and down several
times to remove the water.
▼
Replacingthesystemouterfoilandtheinnerblades
system outer foil
once every year
inner blades
once every two years
► Removingtheouterfoilsection
Press the foil frame release buttons and lift the
outer foil section upwards.
► Attachingtheouterfoilsection
After turning the water inlet surface to the front,
securely attach the outer foil section to the shaver
until it clicks.
► Replacingthesystemouterfoil
1. Press the system outer foil release buttons
and pull down the system outer foil.
2. Align the water inlet surface and the system
outer foil mark ( ) and securely attach
together.
• The system outer foil cannot be reversely
attached.
• Always insert the system outer foil to the
foil frame when attaching to the shaver.
► Replacingtheinnerblades
1. Remove the inner blades one at a time.
• Do not touch the edges (metal parts) of the
inner blades to prevent injury to your hand.
2. Insert the inner blades one at a time until they
click.
2
1
1
1
2