Norcold N4000 Série Manuel D'installation Et D'utilisation page 21

- If the depth of the enclosure is 21 3/8 inches or more and is less than
22 3/8 inches [27], add two baffles [16] to the rear of the enclosure (See
Art02337 and Art02338).
- For model N4104, put one baffle 10 inches above the bottom of
the enclosure [17], or at the top of the lower intake vent opening,
whichever is higher.
- For model N4150, put one baffle 12 inches above the bottom of
the enclosure [17], or at the top of the lower intake vent opening,
whichever is higher.
- Put the other baffle at the lowest edge of the condenser [11] of the
refrigerator.
- Make sure that the baffles are 1 inch or less [19] from the coils
[10] and condenser [11] of the refrigerator.
- Make sure that the baffles are the full width of the inside of the
enclosure.
- If the depth of the enclosure is more than 22 3/8 inches [27], install a
wood or an aluminum or galvanized sheet solid box baffle [21] in the
rear of the enclosure (See Art02341 and Art02342).
- Make sure that the horizontal bottom of the solid box baffle is even
with or above the top edge of the lower exhaust vent [9].
- Make sure that distance from the enclosure floor to the vertical
bottom edge of the solid box baffle [17] is 10 in. for N3104 models and 12 in. for N3150
models.
- Make sure that the back of the solid box baffle is perpendicular to the bottom of the
enclosure.
- Make sure that the back of the solid box baffle is either against the top of the enclosure or
against the angled baffle [13] (depending on the vehicle design).
- Make sure that the solid box baffle is one inch or less [19] from the coils [10] and
condenser [11] of the refrigerator.
- Make sure that the solid box baffle is the full width of the inside of the enclosure.
12
13
14
20
10
27
Art02340
Installation and Owner's Manual 21
19
11
21
17
9
Art02342
22
23