Product Description; Construction And Function - Geberit ECO 203 Mode D'emploi

Product description

Construction and function

The Geberit pressing tool ECO 203 consists of:
• pressing tool with operating instructions
• pressing jaws with compatibility mark or adapter jaws and pressing collars with
compatibility marks
• "General safety notes for electric tools" document
• transport case
The equipment may vary depending on the scope of delivery.
The overview graphic can be found on the fold-out front cover page of this
document.
Item Designation
no.
1 Pressing tool
2 Red LED
3 Green LED
4 Start button
5 Pressing
attachment
6 White LEDs
7 Retaining pin
8 Warning note
sticker
9 Roller drive
10 Release button Press and hold: interrupts the pressing procedure; roller
B1279-001 © 02-2016
966.996.00.0 (00)
Function/description
–
Lights up or flashes: malfunction. See chapters
"Rectifying malfunctions before the pressing procedure"
and "Rectifying malfunctions during the pressing
procedure"
• Lights up: device is ready for operation
• Flashing: malfunction. See chapters "Rectifying
malfunctions before the pressing procedure" and
"Rectifying malfunctions during the pressing
procedure"
• Press briefly: activates the device from idle state
• Press and hold: starts the pressing procedure and
activates the pressing point light; the press connection
is established automatically
The pressing jaw or pressing collar with adapter jaw
appropriate for the diameter of the pressfitting
Two LEDs for pressing point light
Holds the pressing attachment in place
• Warning sign: hazard from flying fragments
• Safety note: read the operating instructions before
commissioning and using the device
Transfers the press capacity from the pressing tool to the
pressing attachment
drive returns to its starting position
EN
25