Playback Via Bluetooth - PORSCHE DESIGN 911 Mode D'emploi

If you briefly press the 'Sound' key again, the display switches to
Use the 'Voice' function to increase speech intelligibility in the stereo as well as in the
surround mode. By doing so, you can better understand dialogue [ speech ] in films with loud
sound effects, for example.
With the 'Volume +/–' keys you can activate or deactivate the 'Voice' function
[ ON or OFF ].
Press the 'Sound' key again to return to the top of the menu
Exit menu
Press and hold the 'Sound' key again for longer than 3 seconds to exit the 'Extended Sound
Functions' menu.
If the 911 Soundbar does not receive any input instruction from the remote control within a
period of 30 seconds, the menu navigation returns automatically to normal mode.
DS_Betriebsanleitung_911_Soundbar_210x148mm_RZ_Teil_1_v19.indd 48-49
L I P
VOI .
...
0 1 1 0
S U B
O N O F F
.
LIP
E Q
E Q 1 E Q 2 E Q 3
D R C
O N O F F
V O L
...
0 9 9
V O I
O N O F F

PLAYBACK VIA BLUETOOTH

Registration requirements
– The Bluetooth function must be activated on
®
the end device.
– The end device must support Bluetooth ® standard
2.0 at a minimum.
– The end device must be within range of the
911 Soundbar [ max. 10 m ].
Registration process
– Select input.
BT
– Press the 'Bluetooth ® Pairing' button.
– appears on the display.
BTP
– Now you have 30 seconds to register
your end device.
BLUETOOTH
– Start the search run on your end device.
PAIRING
– Select as the playback device.
911 SOUNDBAR
– Once confirmed, the connection will be made
automatically and will appear as in
CON
BTP
the display.
– If the connection fails, the message
FAI
will appear.
911
– If the end device requires an access code,
SOUNDBAR
enter 0000.
– If appears in the display, your end device
DIS
is out of range or logged out.
CON
TECHNOLOGY
®
Operating an end device
– The device most recently connected to the
911 Soundbar connects automatically when the
Bluetooth ® function is activated and the input
for Bluetooth playback has been selected.
®
In this case the message
CON
– Start the playback of a medium on your end device
and the sound will automatically be generated by
the 911 Soundbar.
BT
Note: The 911 Soundbar can manage up to three
Bluetooth ® devices. See also the chapter 'Automatic
selection of BT input [ SEL ]' on page 52.
FA I
[ EN ] 911 Soundbar
will appear.
48 | 49
22.09.16 17:48