Connecting Your 911 Soundbar; Operation - PORSCHE DESIGN 911 Mode D'emploi

CONNECTING YOUR 911 SOUNDBAR

Please ensure that all electrical components are switched off before connecting. Your 911 Soundbar has three optional inputs. In principle, it is
enough to connect one of these inputs and all further devices directly to your TV. However, to achieve the best possible sound, we recommend that
you connect your satellite receiver, Blu-ray or DVD player directly to the 911 Soundbar. The following options are possible, depending on the type
and fittings of the source used:
TV – Digital input [ OPTICAL ]
Modern TV devices have an optical audio output [ Toslink ]. Connect this with the input
marked 'TV' on the 911 Soundbar. This connection guarantees optimal signal transmission
and best sound quality.
Important: Remove protective caps from optical cable before inserting.
DVD – Digital input [ COAXIAL ]
To transmit the DVD sound signal, connect the digital coaxial output of your Blu-ray
or DVD player with the jack marked 'DVD' on the 911 Soundbar. To transmit the picture
signal, your DVD player must also be connected to the TV. The input marked 'DVD'
on the 911 Soundbar can be selected if your TV does not have an optical output.
AUX – Analogue input
If your TV only has an audio output marked 'Pre-Out', then connect it to the 911 Soundbar
using the shielded stereo RCA cable plugged into the analogue input marked 'AUX'.
Alternatively, this input can be used to connect video recorders or games consoles.
SUB – Analogue output
Use this output when you want to connect an external active subwoofer. 'SUB OUT' is
not active in the basic setting and needs to be activated using the remote control.
See 'Extended sound functions' on page 46.
DS_Betriebsanleitung_911_Soundbar_210x148mm_RZ_Teil_1_v19.indd 42-43

OPERATION

Power
1
ON
Standby
911 Soundbar disconnected
from the mains
Mute [ muting ]
2
TV DVD AUX
Input [ signal source selection ]
3
Volume [ volume control up/down ]
4
Play Mode
5
Stereo
Surround
6 Sound
TV DVD AUX
Bass
Treble
DIGITAL MOVIE
Bluetooth
7
Connection with a Bluetooth
Memory Function
After the 911 Soundbar has been temporarily disconnected
from the mains, it automatically returns to the last mode selected.
SUB
All settings [ e. g. ON/OFF, volume ] remain in place.
– LED shines green
– LED shines red
– LED not illuminated [ Off ]
– for music
– virtual surround sound for home cinema
– Adjustment via Volume control [ +6... –6 dB ]
– Adjustment via Volume control [ +6... –6 dB ]
® Pairing
® Wireless Technology enabled source
[ EN ] 911 Soundbar
1 2
ON
STANDBY
3 4
5 6
7
Remote control
42 | 43
22.09.16 17:48