emerio PH-121951 Mode D'emploi page 8

TO ASSEMBLE, FOLLOW THESE INSTRUCTIONS
1. Loosen the 4 pieces of M6 X 30 screws from the base, insert the lower tube into the base and then secure
it with the 4 pieces of M6 X 30 screws.
2. Loosen the 4 pieces of M5 X 6 screws; put the power cord buckle onto the middle tube. Fix the middle
tube onto the lower tube using the 4 pieces of M5 X 6 screws.
3. Loosen the tube locking ring on the upper telescoping tube. Adjust the lengeth by pulling out the tube
inside it. Fasten back the tube locking ring.
Loosen the 4 pieces of M5 X 6 screws; put the power cord buckle onto the upper telescoping tube.
Fix the upper telescoping tube onto the middle tube using the 4 pieces of M5 X 6 screws.
- 7 -