Treatment With Massage Oil: (Recommended If You Have Thick Body Hair Or If You Would Like A Deep Massage); Important; Switching On The Fascia-Releazer ® / Selecting The Vibration Setting - Beurer Fascia releazer MG 850 Mode D'emploi

Treatment with massage oil: (recommended if you have thick
body hair or if you would like a deep massage)
If you opt for massage oils, the massage will penetrate deep into the tissue. This
will strongly promote your circulation.

IMPORTANT

Only use plant-based oils as other oils may stain or damage the wood surface
of the Fascia-ReleaZer
1. Put a couple of drops of plant-based oil in the palm of your hand.
2. After the massage treatment, wipe the wood surface of the Fascia-ReleaZer
the attachments and the treated area of the body with a towel
3. After the massage treatment, wipe the wood surface on the Fascia-ReleaZer
and the treated area with a cloth.
The amount of oil to be used depends on the effect you wish to achieve. More oil
causes a faster movement and therefore a more intensive reflex action and circu-
lation of blood to the skin.
Less oil causes a slower treatment that penetrates deeper, with a very relaxing
effect that loosens the tissue.
It is also possible to combine the two. To do so, apply a larger amount of oil onto
the area to be treated and move the Fascia-ReleaZer
wipe off some of the oil with a cloth and treat the same area again, but this time
with slow movements.
8.2 Switching on the Fascia-ReleaZer
Press the ON/OFF button to switch on the Fascia-ReleaZer
shows steady green and the first vibration setting is activated.
.
®
36
over the area quickly. Then
®
/ selecting the vibration setting
®
. The function light
®
,
®
®