High Pressure Applications - Parker SCFT-CAN Série Manuel D'utilisation

1.4

High pressure applications

Selection
DANGER
When selecting sensors, ensure that their overload pressure
will not be exceeded.
The "diesel effect" caused by entrapped air can result in pres-
sure spikes that far exceed the maximum pressure. The operat-
ing pressure of the sensors should be higher than the operating
pressure of the system to be measured.
Installation
NOTICE
Please follow the instructions and observe the correct tighten-
ing torques for fittings and adapters.
Please observe the highest pressures as specified in the cata-
logues for hydraulic fittings (ERMETO) or hydraulic hoses from
Parker.
2