Atag VA7016SRT Mode D'emploi page 48

Problem
The dishes are not dry enough.
20
Possible causes
The Auto Open option is not activated.
The dishwasher is not fully loaded.
Rinse aid needs topping up or dosage is set too
low.
The setting TAB is activated and all-in-one
detergent with insufficient drying effect is being
used.
Action
Activate the Auto Open option.
Fully load the dishwasher.
Top up with rinse aid or increase the rinse aid
dosage level. See the chapter Settings.
Switch all-in-one detergents or deactivate the
setting TAB and top up with salt and separate
rinse aid. See Rinse aid in the chapter Settings.