15.1 Before first use
Clean the device, see "cleaning".
15.2 Operation
1. Insert the plug into the socket.
2. Press down the spout.
3. Place a sufficient container under the spout.
4. Halve the citrus fruit and put the half with the cut surface in the middle of the cone.
Press slightly down the half of the fruit.
5. Close the handle. The device will start working and squeezing the fruit evenly. Let the
device work for 15 seconds and open the handle. Repeate the process once you have
desired amount of juice.
6. Pull the power plug once you have finished.
7. Push the spout upward to close it.
► If you want to squeeze an irregularly shaped fruit then let the handle open and press the
half of fruit evenly with your hand on the cone.
► Remove the pulp regularly from the filter insert, so that the juice can flow. Pull the plug
before this.
Warning
► Do not press too hard with the half of fruit on the cone, the motor could be damaged.
Pay attention to your fingers. Risk of injury!
► Pull the plug if the main contact was in contact with liquid during the operation and dry
the main body immediately with a soft cloth.
► Keep loose clothing, long hair and power cord away from moving parts.
► When the device is operating: Do not touch the filterinsert with your hand, do not touch
the cone.
16 Cleaning and Maintenance
This chapter provides you with important notices with regard to cleaning and maintaining
the device. Please observe the notices to prevent damages due to cleaning the device
incorrectly and to ensure trouble-free operation.
16.1 Safety information
Attention
Please observe the safety instructions, before cleaning your device
► Unplug the device when not in use and before any cleaning.
► Never immerse the unit, cord or plug in water or other liquids and do not place in the
dishwasher.
► Do not use iron brush, abradant, kitchen cleaner, or sharp cleaning tool for cleaning.
► Do not use any aggressive or abrasive cleaning agents or solvents.
► Clean the device directly after each use.
Please note
27