Cleaning And Maintenance - Kalorik JK 39825 Mode D'emploi

Fax +32 2 359 95 50

CLEANING AND MAINTENANCE

Before attempting any cleaning operation, make sure the
•
appliance is unplugged from the supply socket and fully cooled
down.
To clean the exterior surfaces, simply wipe over with a soft damp
•
cloth and dry thoroughly. Never use abrasive products
On no account must the jug kettle or its power base be immersed
•
in water.
FILTER
Your appliance is provided with a mesh filter. This filter is factory
•
pre-installed before the spout.
The filter is placed in front of the spout. Filter should be rinsed
•
clean regularly. For this, slide the filter out, rinse under water, and
slide it back into position once clean.
DESCALING
To remove scale from the jug kettle, use products made especially
available for this purpose. Make sure to use a type recommended
for plastic kettles.
Copies of the I/B. Please reproduce them without any
changes except under
International BELGIUM. The pages must be reproduced and
folded in order to obtain a booklet A5 (+/- 148.5 mm width x
210 mm height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don't change
the page numbering. Keep the language integrity.
what is inside the frame,
6
Assembly page 6/24
special instruction from Team
Print only
USK JK 39825 - 120501