Installation Information; General Information On Installing; Installation Safety And Warnings; General Rules - krispol STARCUS K06 Notice D'utilisation

Any connection of additional elements, programming remote controls, and installation of the drive are described in the following part of
the installation manual.
The drive uses electricity and in case of power failure from the mains, it may be unlocked and the door may be operated manually. There is
also the possibility of installing an emergency battery, which would allow operation of the drive in case of a power failure from the mains.
The drive with the sectional garage door is designed for use in vehicular and pedestrian applications. It should be installed in residential
buildings and it is intended solely for use in individual households. It should not be installed in doors installed in public buildings.
It is unacceptable to install these doors in industrial and commercial facilitates.
The drive is designed for indoor operation. It is prohibited to install the device outdoors and in areas with potentially explosive atmospheres
or in those with the presence of flammable liquids, gases or dust. Do not expose the drive to rain or moisture.
WARNING: Automatic drive.
The motorized garage door may be fixed to the support structure of an apartment building.
The installation base should be as follows:
• walls - dry and level surface with adequate strength made in accordance with binding building regulations,
• metal structures - correct design and sufficient strength. Depending on the installation base, use the following items:
• dowels - for the base made of reinforced concrete or solid brick,
• self-tapping screws or bolts - for steel structures,
• dowels for cavity bricks and aerated concrete - for a base made of cavity bricks, aerated concrete or similar material.
The precise types and size of fixing elements are determined individually with each customer.
Providing the appropriate fixing elements is the responsibility of the customer ordering the garage doors.
The support structure must ensure proper drilling of holes for fixing elements.
WARNING! Any deviations from requirements for fixing elements are forbidden,
as they may create risks for future users!
The place for installing and operating the motorized garage door should be properly lit and should be selected to ensure safe operation
of the garage doors. The owner of the garage door shall be responsible for ensuring these conditions.
• Mounting components of the drive are supplied with the drive.
• It is unacceptable to use other mounting elements than those included in the package.
• All electrical connections must be made after the power supply is cut off and with any potential emergency battery disconnected.
Compliance with the installation procedure described in this manual will ensure the smooth and safe operation of the door with the drive.
Improper installation and operation may lead to serious personal injury and property damage.
Before starting the installation process, please read thoroughly the manual. It is unacceptable to make modifications that are not listed
in this document. It is prohibited to install the drive for other purposes than those specified in this manual. It is obligatory to use only the
included tools and components for fixing and always use the provided fasteners (screws, dowels, screws, nuts) appropriate to the type of
fixing and loads generated by the door with the drive.
WARNING: Important safety instructions. Follow all instructions, as improper
installation may lead to serious injury.
Before starting the assembly read this manual and observe the following rules for eliminating the risks and take appropriate precautions.
For installation work, use personal protective equipment PPE and technical measures to ensure the safety of yourself, third parties, property
and the environment.

3. Installation information

4. Installation safety and warnings

4.1. General rules

25
EN