Sharp LL-T1811W Mode D'emploi page 27

Relevant signal timings (analog)
Hsync
Display mode
(kHz)
VESA
640x480 31.5kHz
37.9kHz
37.5kHz
43.3kHz
640x400 37.9kHz
720x400 37.9kHz
800x600 35.1kHz
37.9kHz
48.1kHz
46.9kHz
53.7kHz
1024x768 48.4kHz
56.5kHz
60.0kHz
68.7kHz
1152x864 67.5kHz
1280x960 60.0kHz
1280x1024 64.0kHz
80.0kHz
720x400 31.5kHz
US text
640x480 35.0kHz
Power
832x624 49.7kHz
Macintosh
series
1024x768 60.2kHz
1152x870 68.7kHz
1024x768 48.3kHz
Sun Ultra
series
53.6kHz
56.6kHz
1152x900 61.8kHz
71.8kHz
1280x1024 71.7kHz
81.1kHz
- All are compliant only with non-interlaced.
- Frequencies for Power Macintosh and the Sun
Ultra series are reference values. To connect,
another adapter (purchased separately) may be
required.
- If the monitor is receiving timing signals that are
not compatible, [OUT OF TIMING] will appear.
Follow your computer's instruction manual to set
the timing so that it is compatible with the
monitor.
- If the monitor is not receiving any signal (synch
signal), [NO SIGNAL] will appear.
Specifications
Relevant signal timings (digital)
Vsync Dot fre-
(Hz) quency (MHz)
60Hz 25.175MHz
72Hz 31.5MHz
75Hz 31.5MHz
85Hz 36.0MHz
85Hz 31.5MHz
85Hz 35.5MHz
56Hz 36.0MHz
60Hz 40.0MHz
72Hz 50.0MHz
75Hz 49.5MHz
85Hz 56.25MHz
60Hz 65.0MHz
70Hz 75.0MHz
75Hz 78.75MHz
-
85Hz 94.5MHz
-
75Hz 108.0MHz
60Hz 108.0MHz
60Hz 108.0MHz
75Hz 135.0MHz
70Hz 28.3MHz
66.7Hz 30.2MHz
74.6Hz 57.3MHz
75Hz 80.0MHz
-
75Hz 100.0MHz
60Hz 64.13MHz
66Hz 70.4MHz
70Hz 74.25MHz
66Hz 94.88MHz
-
76.2Hz 108.23MHz
67.2Hz 117.01MHz
76Hz 134.99MHz
The analog signal input connector pin
27
Hsync
Display mode
(kHz)
VESA 640x480 31.5kHz
37.9kHz
37.5kHz
800x600 37.9kHz
48.1kHz
46.9kHz
1024x768 48.4kHz
56.5kHz
60.0kHz
1152x864 67.5kHz
1280x960 60.0kHz
1280x1024 64.0kHz
720x400 31.5kHz
US text
All are compliant only with non-interlaced.
A computer with an output terminal conforming to
DVI (DVI-D24 pin or DVI-I29 pin) and with SXGA
output capability can be connected here.
Depending on the type of computer to be
connected, the display may not work correctly. In
order to connect, it is necessary to purchase a
digital signal cable (model name: NL-C01E)
separately.
If the monitor is receiving timing signals that are
not compatible, [OUT OF TIMING] will appear.
Follow your computer's instruction manual to set
the timing so that it is compatible with the
monitor.
If the monitor is not receiving any signal (synch
signal), [NO SIGNAL] will appear.
5 4 3
10 9
15 14 13
(Mini D-sub connector with 15 pins)
Number Function
1 Red video signal input
2 Green video signal input
3 Blue video signal input
4 GND
5 GND
6 For red video signal GND
7 For green video signal GND
8 For blue video signal GND
9 DDC/VCC
10 GND
11 N.C.
12 DDC data
13 For Hsync signal input
14 For Vsync signal input
15 DDC clock
Vsync Dot fre-
(Hz) quency (MHz)
60Hz 25.175MHz
72Hz 31.5MHz
75Hz 31.5MHz
60Hz 40.0MHz
72Hz 50.0MHz
75Hz 49.5MHz
60Hz 65.0MHz
70Hz 75.0MHz
75Hz 78.75MHz
75Hz 108.0MHz
60Hz 108.0MHz
60Hz 108.0MHz
70Hz 28.3MHz
2 1
8 7 6
12 11