SilverCrest SBB 850 B1 Mode D'emploi page 11

Masquer les pouces Voir aussi pour SBB 850 B1:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Display
Display for
selecting the weight (750 g, 1000 g, 1250 g)
the remaining baking time in minutes and the
preselected programme time
removal of the kneading hooks
("RMV" = "Remove")
the selected browning level (Light
Medium
, Dark
the selected programme number
the programme sequence
the addition of ingredients ("ADD")
Start/Stop
To start and stop operation or to delete a timer
programme.
To interrupt operation, briefl y press the Start/Stop
button
until you hear a beep and the time fl ashes
on display
. If you press the Start/Stop button
again within the next 10 minutes, operation will be
resumed. If you forget to restart the programme, it
will resume automatically after 10 minutes.
To completely terminate the operation or to delete
a programme, press the Start/Stop button
3 seconds, until you hear a long beep.
NOTE
Do not press the Start/Stop button
want to simply check the condition of the
bread. You can check the baking progress
through the viewing window 1.
CAUTION!
You should always hear a beep when pressing
any button while the appliance is running.
GB │ IE
8 
,
, Rapid
)
for
if you
Browning level
(or rapid mode)
Select the browning level or switch into the rapid
mode (Light/Medium/Dark/Rapid). Press the
browning level button
arrow appears above the desired browning level.
For programmes 1–4 you can, through repeated
pressing of the browning level button
the rapid mode to shorten the baking process.
Press the browning level button
the arrow appears above "Rapid" icon. A browning
level cannot be selected with the programmes 6,
7 and 11.
Timer
Time-delayed baking.
NOTE
Time-delayed baking cannot be set for
programme 11.
Operating light
The operating light
is running.
If you want to start a programme with a time delay,
the operating light
setting is confi rmed. As soon as the programme
starts, the operating light
Bread weight
Select the bread weight (750 g/1000 g/1250 g).
Press the button repeatedly until the arrow appears
under the desired weight. The weight specifi cations
(750 g/1000 g/1250 g) refer to the total amount
of ingredients placed in the baking mould 7.
NOTE
The default setting when switching the appli-
ance on is 1250 g. You cannot adjust the
bread weight with the Programmes 6, 7, 11
and 12.
repeatedly, until the
, activate
repeatedly until
lights up when a programme
fl ashes as soon as the timer
lights up permanently.
SBB 850 B1

Publicité

Table des Matières
loading

Table des Matières