Before initial use
Unpacking
■
Unpack the appliance and remove all packaging
materials as well as any stickers and protective
fi lms.
■
When unpacking the appliance, check it thor-
oughly for possible transport damage. If required,
contact the Service Centre (see section "Warranty
and Service").
Initial cleaning
Wipe the baking mould 7, kneading blades 6
and upper surfaces of the bread maker with a
clean moist cloth before taking it into operation.
Do not use abrasive sponges or abrasive cleaning
agents. Remove the protective foil from the control
panel 5 if you have not already done so.
Initial heating
1) When heating for the fi rst time, place the
empty baking mould 7 into the appliance and
then close the lid 2.
WARNING! RISK OF FIRE!
►
Do not heat the bread maker for more than
5 minutes with an empty baking mould 7.
There is a risk of overheating.
2) Select programme 12, as described in the
section "Programmes", and press the Start/
Stop button
to heat up the appliance for
5 minutes.
3) After 5 minutes, end the programme by press-
ing and holding the Start/Stop button
you hear a long signal tone.
NOTE
As the heating elements are lightly greased, you
may notice a slight smell when using the appli-
ance for the fi rst time. This is harmless and stops
after a short time. Ensure suffi cient ventilation; for
example, by opening a window.
SBB 850 B1
4) Let the appliance cool down completely and
once again wipe the baking mould 7, knead-
ing blades 6 and the outer surfaces of the
bread maker with a clean moist cloth.
Features
This bread maker allows you to bake bread just
the way you like it.
■
You can choose from 12 diff erent baking
programmes.
■
You can use ready-to-use baking mixtures.
■
You can prepare dough for rolls and noodles
and even make marmalades and jams.
■
By using the programme "Gluten-free" you
can bake gluten-free baking mixes and recipes
containing gluten-free fl ours, such as cornfl our,
buckwheat fl our or potato fl our.
Control panel
until
RMV
GB │ IE
│
7
■