Windows 7 - AKG Perception 120 USB Mode D'emploi

Configuration / Volume control

WINDOWS 7

22
1) In the Control Panel open the "Hardware and Sound" category and select
Sound.
2) Select the Playback tab.
3) Recommendation: The Sound playback device must be changed from
"Perception 120 USB" back to the original playback device.
4) Select the Recording tab.
5) Ensure that the AKG Perception 120 USB is highlighted and the green
tick is in place.
6) Click on Properties to open the volume control.
7) Select the Levels tab.
8) Use the slider to select the volume required for your recordings, see Level
settings (Page 24). settings
settings settings
Figure 7: Sound settings in WINDOWS 7
Figure 8: Volume control in WINDOWS 7
Perception USB
www.audiovias.com
Level Level Level