Controls And Indicators - Sharp QT-CD180W Mode D'emploi

Precautions
Do not expose the unit to moisture, to temperatures higher than 60°C
(140°F) or to extremely low temperatures.
Keep the unit away from direct sunlight, strong magnetic fields, ex-
cessive dust, humidity and electronic/electrical equipment (home com-
puters, facsimiles, etc.) which generates electrical noise.
Hold the AC power plug by the head when removing it from the AC
socket, as pulling the lead can damage internal wires.
When cleaning the heads, pinch roller, etc., remove the AC power
lead from the AC socket as the unit contains high voltages.
Do not remove the outer cover, as this may result in electric shock.
Refer internal service to your local SHARP service facility.
Use the unit on a firm, level surface free from vibration, and do not
place anything on the top of the unit.
If the unit does not work properly, set the FUNCTION switch to STAND-
BY and then to ON again.
In case of an electrical storm, unplug the unit for safety.
This unit should only be used within the range of 5°C - 35°C (41°F -
95°F).
The ventilation should not be impeded by covering the ventilation
openings with items, such as newspapers, tablecloths, curtains, etc.
No naked flame sources, such as lighted candles, should be placed
on the apparatus.
Attention should be drawn to the environmental aspects of battery
disposal.
Warnings:
The voltage used must be the same as that specified on this unit.
Using this product with a higher voltage other than which is specified
is dangerous and may result in a fire or other type of accident caus-
ing damage. SHARP will not be held responsible for any damage
resulting from use of this unit with a voltage other than that which is
specified.
CD players use a laser pickup which can damage the eyes if viewed
directly. Do not look at the pickup, and do not touch the pickup di-
rectly.

Controls and Indicators

1 2 3 4 5 6 7 8
15
16
17
18
PORTABLE CD STEREO SYSTEM
VOLTAGE SELECTOR
110 - 127 / 220 - 240 V ç 50 / 60 Hz
9 V å, (UM/SUM-1, R20 or HP-2) × 6
AC AC
110-127V 220-240V
FREQUENCY RANGE
19
FM 88 - 108 MHz AM 526.5 - 1606.5 kHz
SERIAL NO.
SHARP CORPORATION
01. Extra Bass Button
02. Volume Control
03. Function Switch
04. CD Compartment
05. (TAPE) Pause Button
06. (TAPE) Stop/Eject Button
07. (TAPE) Fast Forward Button
08. (TAPE) Rewind Button
09. Tuning Control
10. (TAPE) Play Button
MODEL NO. QT-CD180W
13 W
CANCEL
<The bottom of the unit>
11. (TAPE) Record Button
12. (CD) Play/Pause Button
13. (CD) Track Up/Cue Button
14. Cassette Compartment
15. (CD) Stop Button
16. (CD) Track Down/Review
Button
17. (CD) Play Indicator
18. (CD) Pause Indicator
19. Voltage Selector Switch
20. Beat Cancel Switch
9
10
11
12
13
14
BEAT
A B
20