Real Time Clock (Rtc); Battery Check - Oki LE840 Guide De L'utilisateur

2. PRINTER SETUP

2.6.11 Real Time Clock (RTC)

SYSTEM MODE
<8>BASIC
<9>FOR FACTORY
<10>RFID
<11>RTC
The RTC menu allows the date and time to be set, enables the battery
check function, and selects the RTC data renewal timing while labels are
being printed.
The Real Time Clock Setting is effective only when an optional RTC &
USB Host Interface Card is installed.
(1) DATE TIME
This parameter is to set date and time.
YY/MM/DD
hh:mm:ss

(2) BATTERY CHECK

Enable the low battery check function.
 OFF
 ON
(3) RENEWAL
This parameter is to choose when date and time are updated while
printing.
 BATCH
 PAGE
E2-38
00 00
00 00
The real time clock data is read only for the first
label in a batch, the same time is printed on the all
labels.
The real time clock data is read at the start of
printing each label, the real time can be printed on
each label.
2.6 Printer Setting
00 [RIGHT]
00