Charging The Battery - domoova DRV50 Manuel D'utilisation

EN
Operating the robot

Charging the battery

Assembling the home base
1 m
1 m
2 m
Plug in the home base using the power cable.
Place the home base on a level surface next to a wall. Keep a space
of 2 m in front of the home base and 1 m at either side.
NOTE: When the DOMOOVA robot is on its home base, make sure that the home
base power light is on.
Switching the robot on

Turn the switch on the side of the robot to ON. "I" is ON and "O" is
OFF. The robot is ready to be charged.
9