Charging The Robot - domoova DRV80 Connect Mode D'emploi

EN
Operating the robot

Charging the robot

Assembling the home base
1 m 1 m
2 m
Plug in the home base using the power cable.
Place it on a level surface next to a wall, perpendicular to the floor.
Keep a distance of 2m minimum in front of the base and 1m at either
side.
NOTE: When the DOMOOVA robot is on its home base, make sure that it is switched
on and the home base power light is on.
Switching the robot on
Turn the power switch to ON. "I" is ON and "O" is OFF. The robot is
ready to be charged.
9