Operating The Vacuum; Switching On The Appliance - domoova DTV20 Manuel D'utilisation

EN

Operating the vacuum

Switching on the appliance

Assembling DTV20
Figure 1
Connect the following elements to the appliance body: carpet and
hard floor brush, cleaning wand and flexible hose (Figure 1).
Then adjust the cleaning wand height as needed (Figures 2 and 3).
Plugging in the appliance
Figure 1
Unwind the vacuum's power cable at the rear of the vacuum (Figure
1) and plug it into a power outlet (Figure 2). The vacuum cleaner is
ready for use.
Figure 2
Figure 2
8
Figure 3
Figure 3